Specifications
Performance
- Frequency Response: ±0.25dB, 20-20,000Hz
- Total Harmonic Distortion & Noise: <0.02%, 20-20,000Hz, at an output level of +18dBu into 600 ohms.
- IM Distortion: <0.05% at an output level of +18dBu into 600 ohms (60/7000,4.1).
- Noise at Output: <-75dBu 20-20,000Hz.
- Gain: 0dB, ±0.5dB.
Installation
Input
- Load Impedance: >20k ohms in parallel with 500pF, electronically balanced.
- Driving Impedance: Ideally 600 ohms or less, balanced or unbalanced.
- Nominal Input Level: +4dBu (for inputs between -10dBu and +8dBu). Can be changed with a simple modification to -10dBu (for inputs between -24 and -6dBu).
- Absolute Overload Point: +20dBu.
- Common Mode Rejection: >50dB.
- Connectors: Barrier strip (#5 screws), XL-type connectors.
Output
- Load Impedance: greater than or equal to 600 ohms.
- Source Impedance: 30 ohms, ±5%, balanced, floating.
- Maximum Output Level: >20dBu into 600ohms.
- Connectors: Barrier strip (#5 screws), XL-type connectors.
Physical
- Dimensions: 19"(48.3cm) wide, 1.75"(4.4cm) high, 10.5"(26.7cm) deep.
- Weight: 6.75lb (3kg) net; 10lb (4.5kg), shipping.
- Power Requirements: 115/230VAC ±10%, 50-60Hz, 9VA. 115V version supplied with three-wire "U-ground" power cord to USA standards attached; 230V version supplied with CEE-7/7-plug.
- Fuse: 1/8 amp 3AG 250V Slow-Blow or 125mA "T"-type, as appropriate.
Specifications subject to change without notice.